← Blog

How Do You Stop Light Leaking Around a Blackout Shade?

Sunday, November 8, 2026 — Wholesale Blind Factory

Light leaks around a blackout shade almost always come from the gap between the shade and the window frame, not from the fabric itself. The fix, in order of effectiveness, is to mount the shade outside the frame with generous overlap, choose a fabric that is truly blackout rather than room darkening, and cover the remaining edges with a second layer such as drapery or a fitted valance. No roller, cellular or roman shade seals a window perfectly, so the aim is to cut the light to the point where it no longer wakes you, and this guide shows how.

Where the light actually comes from

When a bedroom is not dark enough, people usually blame the fabric. In practice there are four separate leaks, and each has its own answer:

Start by working out which one you have. Close the shade on a bright morning, stand back and look at where the light shows. A glow across the whole shade is a fabric problem. A bright outline around the edges is a fit problem, and a fit problem is solved by measuring and mounting, not by buying a darker fabric.

Choose a real blackout fabric first

The labels matter, and they are often used loosely. A room darkening fabric reduces light a great deal but still lets some through. A blackout fabric is made to block it, usually with a dense or backed construction. If you need a dark bedroom, nursery or a room for daytime sleep, start with blackout. There is more on the differences in our guide to blackout, room darkening and light filtering labels.

Colour also matters at the edges. A lighter fabric can look bright where light grazes it, so a darker side facing the window, or a darker shade overall, can read as noticeably gloomier in the room.

Outside mount beats inside mount for darkness

An inside mount sits within the window recess and looks neat, but it needs a small clearance on each side so the shade can move freely. That clearance is exactly where light leaks in. An outside mount places the shade on the wall or trim, wider and taller than the opening, so the fabric overlaps the frame and the light has to travel around it.

For a dark room, outside mount is the better choice. As a general rule, extend the shade past the window opening on both sides and above it, and let it hang a little below the sill. More overlap means fewer leaks, but there are limits: trim, nearby walls and furniture can all set how far you can go. Our inside vs outside mount measuring guide walks through the choice and the measurements, and the page on common measuring mistakes is worth reading before you order.

Made-to-measure is also what makes this possible. A custom shade is cut to your width and drop, so you can specify the overlap you want instead of settling for the nearest standard size. That is one reason custom fit beats cut-down big-box blinds when darkness is the goal.

Reduce the top and bottom gaps

The top gap is easy to overlook. If the headrail sits low inside the window, light pours over it. Mounting the shade higher, or choosing an outside mount that reaches above the frame, closes most of it. A fascia or valance can also hide the top edge. See headrail, valance and fascia: do you need one for how each one works.

At the bottom, let the shade extend slightly past the sill rather than stopping at it. A heavier bottom rail helps the shade hang straight and lie flatter against the surface.

Layer for the last few percent

If you want near-total darkness, layering is the most reliable approach. A blackout shade handles the main window area, and a second layer deals with the edges:

Layering also gives you flexibility. You can raise the blackout layer on weekends and keep a soft view during the day, which a single blackout shade cannot do.

Which shade types handle gaps best

No product is leak-proof, but some are easier to make dark than others:

For nurseries and shift workers, where darkness matters most, see our guides on nursery window coverings and window coverings for shift workers. Cordless and motorized controls are a sensible option in children's rooms.

A quick checklist before you order

  1. Check at dawn which leaks you actually have: edges, top, bottom or fabric.
  2. Choose a blackout fabric, not room darkening, if the room must be dark.
  3. Choose outside mount if space on the wall allows it, and plan for overlap on all sides.
  4. Decide whether you will layer drapery or a second shade for the edges.
  5. Measure the window twice, and note the trim, handles or furniture that limit the overlap.

Get a measure that fits your room

Darkness depends on a precise fit, and the easiest way to get it is to have it measured. Wholesale Blind Factory makes custom blinds and shades in Coquitlam and offers a free in-home consultation across Metro Vancouver, so we can look at your actual window, trim and the room's light, and suggest the mount and layering that suit it. If you are comparing options, get in touch for a quote and we will talk it through with you.