← Blog

What Are the Best Window Coverings for a Townhouse, Floor by Floor?

Saturday, November 21, 2026 — Wholesale Blind Factory

For a Metro Vancouver townhouse, the best approach is to choose window coverings floor by floor rather than room by room: vertical blinds or a wide roller shade for the ground-floor slider, solar or zebra shades for the main living floor, blackout cellular or roller shades for the top-floor bedrooms, and faux wood blinds wherever there is steam. Keep the street-facing side uniform, because most strata councils ask for that, and use cordless or motorized lift on the tall stairwell window you cannot reach. Townhouses put three different climates and three different privacy problems in one narrow building, so one product throughout rarely works well.

Why townhouses are their own problem

A typical Lower Mainland townhouse is narrow and stacked, with shared walls on one or both sides. That shape creates a few predictable issues:

Ground floor: sliders, entries and street-level privacy

The ground floor usually has the patio slider, a garage entry, and sometimes a small den or flex room facing the street or the lane.

Patio sliding doors. PVC vertical blinds remain the practical choice for a slider people walk through every day: the vanes stack to one side, they handle knocks from kids and pets, and one damaged vane can be replaced on its own. If you prefer a cleaner look, a wide roller shade or a pair of side-by-side rollers can work too, provided they are lifted fully out of the way. Our article on the best window coverings for large patio sliding doors goes through the trade-offs.

Street-facing den or office. Ground-floor windows are where passers-by can see in. Top-down/bottom-up cellular shades let you cover the lower half for privacy while keeping daylight from the top. Zebra shades are another good fit: open the bands for light and view, close them when the street gets busy.

Main floor: the living room, kitchen and dining

The main floor is usually the open-plan middle storey, with the largest windows and the most sun.

Living room. A solar roller shade cuts glare and UV while keeping the view, which matters when a single window wall is your only source of light. If you want privacy after dark as well, a dual roller shade pairs a solar fabric with a blackout or privacy fabric on one bracket, or zebra shades give you a softer version of the same day/night switch.

Kitchen. Steam and splashes call for moisture-tolerant materials. Faux wood blinds do not warp in humidity the way real wood can, and they wipe clean. A vinyl-backed roller shade is the other easy-care option.

Matching across the open plan. In a narrow townhouse, the kitchen, dining and living windows are often visible at once. Keeping the same product family and colour across them, even if the fabric opacity changes, makes the floor read as one room. See matching window coverings across an open floor plan for how to vary function without breaking the look.

Top floor: bedrooms and the heat that rises

Bedrooms usually sit on the top storey, which is also the warmest floor in summer and, on west or south faces, the one that catches the most afternoon sun.

If you are deciding between blackout, room-darkening and light-filtering fabrics for each bedroom, our explainer on choosing blackout, room-darkening or light-filtering sets out the differences plainly.

The stairwell window nobody can reach

Many townhouses have a tall window on the stair landing, sometimes spanning two storeys. It is often the hardest window in the house to cover and to operate.

There is more on this in the best window coverings for stairwells and landings.

Shared walls and noise

Shared walls do not carry window noise between units in any meaningful way, but townhouse rows close to roads, lanes or a busy courtyard can be noisy through the glass. A soft, fitted covering helps a little. Cellular shades absorb some sound because of their honeycomb structure, and a close inside-mount fit reduces gaps. Be realistic: window coverings soften noise; they do not soundproof a room. Our article on window coverings that help with street noise is honest about what to expect.

Keeping the street side uniform

The outward-facing look is where townhouse owners most often run into strata rules. Many councils require a white or neutral backing visible from outside, or the same product on every unit's street windows. A few practical ways to meet this without giving up what you want inside:

Ordering a whole townhouse at once

Townhouses often have a dozen or more windows across three floors, and ordering them together has real advantages: one measure, one installation visit, consistent colours from the same production run, and one point of contact if anything needs adjusting. Our guide to ordering blinds for a whole house explains how to prioritise if you need to phase the work.

A sensible floor-by-floor starting plan looks like this:

Getting it right the first time

Because we make our blinds and shades in our own factory in Coquitlam, every window is measured and built to fit, which matters in townhouses where window sizes often vary slightly from one unit to the next even within the same complex. If you would like help planning your townhouse floor by floor, book a free in-home consultation. We will measure every window, bring samples you can see in your own light, and check your strata requirements before anything is ordered.