← Blog
How Do You Choose Window Coverings for an East-Facing Bedroom?
Thursday, November 12, 2026 — Wholesale Blind Factory
For an east-facing bedroom, the best window covering is one that blocks the sunrise completely on the mornings you want to sleep, then lets clean daylight in once you are up. In practice that means a blackout roller shade or blackout cellular shade, mounted to minimise edge gaps, and often paired with a light-filtering layer for the daytime. East light is low, bright and early: in a Metro Vancouver June the sun comes up before 5:15 a.m., and it comes in nearly flat, straight across the room and onto the pillow. A covering that only "darkens" a room is usually not enough. Here is how to choose.
What makes east light different
Every window gets light differently, and orientation matters most in a bedroom. (For the general picture, see our guide to north- vs south-facing rooms.) East windows have three habits:
- The light arrives while you are asleep. West glare is an evening problem you are awake for. East glare starts at dawn, which on the BC coast swings from around 8 a.m. in December to before 5:15 in June.
- It comes in low. A rising sun shines almost horizontally through the glass, so it reaches deep into the room and finds every gap at the sides of a shade.
- It is bright but rarely hot for long. Morning sun warms an east room early, then moves off the glass by late morning. Heat matters less than light here, the opposite of a west-facing living room.
So the job in an east bedroom is mainly light control at the edges and early in the day. Heat control comes second.
Start with the opacity label
Window covering fabrics come in three broad grades, and the difference matters more on an east window than anywhere else:
- Light filtering: softens light and gives privacy, but a sunrise will still light the room. Fine for a guest room you rarely sleep in late, not for a main bedroom.
- Room darkening: blocks most light. Many people find it good enough on a north window but not on an east one, because the low sun makes the fabric glow.
- Blackout: an opaque fabric or backing that blocks light through the material itself. This is the grade to start from for an east-facing bedroom.
Our blackout, room-darkening and light-filtering guide explains the labels in more detail.
The real problem: edge light
Even a true blackout fabric leaves light around its edges, and on an east window that light is the first thing you see at 5 a.m. Because the sun is low, it slips through side gaps and lands as bright stripes on the wall. Ways to deal with it, roughly from simplest to most complete:
- Inside mount with tight deductions. A shade made to the exact frame size leaves the smallest practical gap. Factory-made, made-to-measure sizing matters here; a cut-down big-box shade tends to leave wider gaps.
- Outside mount with overlap. Mounting the shade on the wall and letting it overlap the frame by a few centimetres on each side blocks much more of the sideways light, at the cost of a slightly bulkier look.
- A fascia or valance to cover the light that escapes over the top roll of a roller shade.
- Layering: a blackout shade behind drapes, or two shades, so each covers the other's gaps.
We have a whole article on blocking blackout edge light if this is your main complaint.
The products that work best on an east bedroom window
- Blackout roller shades: the clean, simple default. Slim profile, fabrics in many colours, easy to motorize. The roll leaves a small gap at the sides, so think about mount and fascia.
- Blackout cellular shades: the honeycomb structure gives blackout plus insulation, which helps on cold winter mornings when you are lying next to the glass. A top-down-bottom-up cellular shade also lets you keep privacy at bed height while letting daylight in through the top once you are awake.
- Dual or day-night roller shades: a blackout shade and a light-filtering or solar shade on one window. Blackout at night and through the sunrise; the sheer one during the day so the room is bright without being on show. See dual roller shades explained.
- Zebra shades: good for daytime light control and views, but the alternating bands are not blackout. On an east bedroom they work best as the daytime layer, not the only covering.
- California shutters: solid panels block a lot of light and look permanent, but light gets through between the louvres and around the frame. Pair them with a blackout layer if you sleep past sunrise.
Motorization: let the morning work for you
East bedrooms are where Somfy motorization makes the most practical sense. You can schedule the blackout shade to stay down until your alarm, then raise it by itself so the morning light helps you wake up. Weekend scenes can keep it down longer. For shift workers who sleep during the day, the same setup holds the room dark well past sunrise. Our Somfy automation scenes guide shows how schedules and scenes are set up.
Don't forget the window itself
In a BC winter, an east-facing bedroom window often carries condensation on cold mornings, especially in condos. A few things help:
- Choose moisture-tolerant materials: PVC-backed roller fabrics and faux wood rather than real wood near a window that weeps.
- Raise the shade for part of the day so air can reach the glass and dry it.
- Leave a little room between the covering and the glass with an inside mount, rather than pressing fabric against it.
See condensation on windows in coastal BC for more.
A simple decision guide
- You sleep past sunrise and want a dark room: blackout cellular or blackout roller, outside mount or tight inside mount, fascia on a roller.
- You want darkness at night and daylight during the day: a dual roller shade or a top-down-bottom-up blackout cellular shade.
- You love the look of shutters: California shutters plus a blackout layer behind them.
- Your schedule changes (shift work, kids, weekends): add Somfy motorization so the shade follows your schedule, not the sun.
- There are children in the room: cordless or motorized only. See our child and pet safety checklist.
Getting it right
The difference between a bedroom that wakes you at dawn and one that lets you sleep is mostly in the details: the fabric's opacity, the mount, and the few millimetres at the edges. Those are hard to judge from a photo. Book a free in-home consultation and we will measure the window, show you blackout fabrics in your room, and suggest the mount that leaves the least light at the edges. Everything is made to measure at our factory in Coquitlam.