Tuesday, November 17, 2026 — Wholesale Blind Factory
For floor-to-ceiling condo windows and window walls, the best window covering is usually a roller shade: a solar shade where you want to keep the view and cut glare and heat, a blackout roller shade in bedrooms, or a dual roller shade that puts both on one bracket. Rollers are slim enough for the shallow frames most condo window walls have, they are made wide, they disappear into a small roll at the top, and they are the easiest product to motorize. Zebra shades and cellular shades are the main alternatives, and PVC vertical blinds still make sense on the sliding door. Here is how to choose, and what is different about a wall of glass.
A window wall is not just a big window. It is glass from the slab to the ceiling, usually in aluminium frames, often with a sliding or swing door somewhere in the run. That changes the job in five ways:
On a typical window wall you have three options:
Which of these works depends on what is behind the surface: concrete, steel stud or wood blocking each take a different fastener, and some stratas restrict drilling into the window frame itself. This is the main reason to have a window wall measured professionally. A fraction of an inch matters more across twelve feet of glass than it does on one bedroom window, and a ceiling that is not level shows up as a crooked hem. Our inside vs outside mount guide covers the basics.
A roller shade suits a window wall for simple reasons. The hardware is small, the fabric hangs flat and close to the glass, and when it is up you get the whole view back.
One shade cannot span a whole window wall, and you would not want it to. Every fabric has a maximum width, and a very wide, very tall shade is heavy and more likely to roll unevenly. The usual approach is to split the shades where the window frame posts are, so the small gap between two shades sits in front of a post, not in front of clear glass. Shades in a row should be made from the same fabric lot and hung at the same height so the hems line up when they are lowered together. A fascia or valance across the top can make several shades read as one. More on sizes in how big one blind can be.
Zebra shades have alternating sheer and solid bands that slide past each other, so one shade moves from view to privacy without being raised. They look sharp on tall glass and suit living rooms. Two cautions: they are not a blackout product, and the sheer bands give no privacy at night until you close them.
Cellular shades are the choice when comfort matters more than the view. Their honeycomb pockets trap air, which helps against a cold glass wall in January and a hot one in July. They stack very small at the top. On tall, wide glass they are best split into sections, and a top-down bottom-up version lets you cover the lower half for privacy while keeping sky and daylight above.
Most window walls include a balcony door, and it needs a covering that gets out of the way. A roller shade on its own section works well if it is raised whenever the door is in use. PVC vertical blinds are still the most practical choice for a door that is opened many times a day: they slide aside, the vanes are tough, and a damaged vane can be replaced on its own. Our guide to large patio and sliding doors compares the options. Mixing a vertical blind on the door with roller shades on the fixed glass is common. Keep the colours matched.
A tall shade is a long pull, and a window wall has several of them. Somfy motorization lets you lower the whole row with one button, or on a schedule, so the shades are already down when the afternoon sun arrives and the suite stays cooler. In a finished condo, where running new wiring through concrete is not practical, battery-powered motors are the usual retrofit. Motorized shades also have no cords, which matters in homes with children or pets. Our article on power options explains the choices.
Check the bylaws before you choose a colour. Many buildings ask for white or off-white facing outside. That does not limit the room side as much as people expect: many roller and solar fabrics have a light exterior face, and a dual roller can put a compliant fabric on the glass side. Our guide to strata rules for window coverings covers what to ask your strata.
For condensation, choose materials that tolerate moisture. PVC-backed and solar roller fabrics, faux wood blinds and moisture-tolerant cellular fabrics all cope with a damp sill. Leave a small gap between the bottom rail and the sill, and raise the shades for part of each winter day so air can move across the glass.
A window wall is the one place where we would not suggest measuring it yourself. The mounting surface, the frame posts, the door and the strata rules all shape the answer, and we make every shade to the measurements taken on site. If you are in Metro Vancouver, book a free in-home consultation. We will bring fabric samples, look at how your windows are built, and give you a quote for the whole wall.